Auto wrapping decoration gold 3D carbon fiber vinyl film 1.27x30m

Auto wrapping decoration gold 3D carbon fiber vinyl film 1.27x30m Model:C5003 Color:Gold Outdoor durability:2-3 years

3D carbon fiber vinyl film is not just a cheap imitation vinyl, it is a high quality three-dimensional textured vinyl that reflects light the same way real carbon fiber parts do. It has a self-adhesive back and will stick to pretty much any surface, but also can be removed and re-applied numerous times without losing its adhesion. 3D carbon fiber vinyl film is also water resistant and UV stable, so applying it to exterior surfaces such as a hood, spoiler, or the whole car is not an issue.

Features:

- Durable- Scratch Resistant- Resistant To Solvents- Easy Cleaning & Maintenance- Stylish- Can Stick Anywhere

1.has a look and fell similar to carbon fiber bonnet and hard-top

2.can be applied on interior and exterior surfaces of a car (hoods,trunks, side view mirrors and so on)

3.can be applied easily on all the common car paints

4.without residual glue after remove

The film is embossed, resembling true carbon fiber, which reflects lights as expected and change the highlights of the pattern depending on the viewing angle.

Color:

1. 1.27mx30m:16 colors,

C5001 Black,C5002 White,C5003 Gold,C5004 Silver,C5005 Pink,C5006 Orange,C5007 Red,C5008 Dark blue,C5009 Purplish red,C5010 Dark purplish red,C5011 Dark gold,C5012 Yellow,C5013 Green,C5014 Transparent,C5015 Purple,C5016 Brown

2. 1.52mx30m:C5001 Black only

Product characteristic:
Outdoor durability	2-3 years
Face film	High flexible PVC film
Thickness of film without glue	90micron
Glue thickness	30 µm
Glue	Transparent,polyacrylate, removable, from Taiwan
Release paper	One side siliconized paper, 120g
Adhesive power	16 H / 25 mm
(of FINAT-FTM1, after 24 hours)
Heat temperature	More than +180oC
Temperature resistance	From -30oC to +250oC
Laceration reluctance(DIN EN ISO 527)	Longitudinally min 19 Mpa across min 19 MPa
Laceration stretching (DIN EN ISO 527)	Longitudinally min 150% across min 150%
Film style	Without air channels,non air bubble free
Features	Stretchable,removableDo not damage the car paintUV proof,weather proofResistant to solventsEasy cleaningEasy MaintenanceStylish,can stick any where

Installation Tips:

Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove wrinklesUsing a soft rubber squeegee will help smooth out bubbles and wrinkles

Application: Carbon fiber modification on engine hood,empennage, surrounding surface, car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by this problem any more after the carbon fiber vinyl come out as its price is lower and easy to operate.

Installation:

1. First volume of a good length for your body size, according to the amount of good film cut to size the length of a good car, cutting out when the multi-cut 3-5cm, in order to facilitate construction.

2. To clean the surface and around the body in order to avoid dust, you can spray some of the appropriate mixture of water and Xidi Ling to the car body and car membrane for water and scraping the mucous membrane when the bubble.

3. Film when the surface curvature is large, the wind can be a hair dryer or heat gun can be attached more perfect.

4. Finally, the body lines with a knife according to film, the excess membrane can be torn off, the construction is completed.

Car wraps -Transform your vehicle the quick and easy way,Design your dream car now

Auto wrapping decoration gold 3D carbon fiber vinyl film 1.27x30m